Mount the device on three types of thermostatic radiator valves without tools
Additional temperature sensor ensures precision while adjusting the temperature of your home
Smart Home
Simplified
Think of a situation where you are out of the station and you want to control the temperature of your house. Your normal remote-controlled, heat-controlling equipment does not allow you to do so. Fibaro has an excellent solution for this problem in the form of a thermostatic heat controller pack. With this equipment installed in your house, you can adjust the temperature of your house from a faraway location.
The heat controller starter pack from Fibaro has two devices. A heat controller and a temperature sensor. The Z-wave (a popular wireless communication protocol for home automation system) compatible device is the most intelligent of its kind. You can mount the device on three thermostatic radiator valves. Whenever temperature rises beyond a set level the LED illuminating ring around the device changes color.
With the help of the button, you can activate and deactivate any electrical device or sequence of your choice. It can be a simple light bulb or a complex sequence. So the button can be called a universal manual switch and serves great purposes at your work or home including the service as an emergency help button. The button is available in various colors and you can choose the one that suits best for your ambience.
The battery-powered button is totally wireless, mobile, and long-lasting. You can easily install it and easily remove it. With five click configurations and one long press, the button can react to six actions that you can choose. With this button that can easily be operated alike by the children and the elders, your dear ones are just a button away from you!
Buy the most efficient Heat Controller Starter Pack from Fibaro
- Works with Z-wave and Z-wave plus controllers
- Can be installed in three types of thermostatic radiator valves-M30 x 1.5, Danfoss RTD-Nand Danfoss RA-N
- Supports Z-wave security modes S0 and S2
- Battery-powered and the battery can be charged through a micro USB port
- Very easy to install and remove
- An external temperature sensor is available with the device
- Heating schedules can be set
- Will shut off automatically when heating is no longer needed
- Anti-freezing function
- Desired temperature level is set using an uncontained knob
- A free Fibaro app allows you to control the device from anywhere in the world
Every project starts with a conversation
Contact Stebilex today to find out how we can help turn your home into a smart home.
Technical Specification
| Power Supply | 3.7V Li-Poly battery pack (non-replaceable) |
| Charging port | micro-USB |
| Charger voltage (not included) | 5V DC (±5%) |
| Minimum charger current (not included) | 0.5A |
| Operating temperature | 0 – 40°C |
| Storage temperature (standby mode) | -10 – 25°C |
| Maximum water temperature | 90°C |
| Temperature measuring accuracy | 0.5°C (within 0–40°C range) |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868 MHz ISM band (for EU) |
| Compliance with | RoHS 2011/65/EU RED 2014/53/EU |
| Range | up to 40m (131 ft) (depending on building structure) |
| Dimensions (Diameter x Height) | 56 x 74 mm (without the adapter) 56 x 87 mm (with the adapter) |
