Reader
Every type of card reader may raise/lower function with the aid of PLC-controlled electronics
Build
The body is made of 316 stainless steel and underground parts are hot dip galvanized to protect agaiis nst corrosion
Build
The system can operate in extreme weather conditions such as from -25 °C and +65 °C and in 95% non-condensing humidity
Weather Proof
The system can incorporate safety add-ons such as photocells, inductive loop detectors, flashing lights, or red/green lights.
KNOW THE PRODUCT
What are Optima PRB Bollards?
The Optima PRB series pneumatic retractable bollards are intended for use at high-security vehicle entrances, as well as in military, commercial, industrial, governmental, and industrial facilities that are restricted to vehicular traffic during specific hours of the day. The drive unit is pneumatic. Every type of card reader, biometric reader (such as fingerprint or hand shape), radio control, on/off key switch, etc. may all perform the raise/lower function with the aid of PLC-controlled electronics. Additionally, the system can incorporate safety add-ons such as photocells, inductive loop detectors, flashing lights, or red/green lights.
Characteristic Features
- Height when raised: 400-1000 mm
- Standard Height: 800 mm
- Environmental durability: 316 stainless steel sleeve, underground parts are hot dip galvanized
- Axle load: 50 tons
- Structure: Heavy duty
- Top plate: Sand-blasted aluminium with flashing lights around
- Type of steel: S275 (inner core), finishing 316 stainless steel sleeve
- Traffic light: Red/green LED, 200 mm diameter, steel post 2 m height and electrostatic powder coated
- Power:380 V, 3 Phase, 50-60 Hz (or 220 V/ 440 V etc., three-phase, 50-60 Hz optional by a transformer)
- Speed: 9-10 seconds
- Desktop keyboard: Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator
- Extra I/O at the PLC: Enough I/O’s to connect any card reader, extra override keyboard etc. later on
- Proximity Sensor: Available to sense the position of the bollard
- Dual vehicle safety loop detector: This detector is used for safety
- Power backup options: UPS
- Environmental conditions: -25 °C and +65 °C, 95% non-condensing humidity
Power Unit and Control Electronics:
A compressor with a storage tank is present in all PRB series. The Control system is PLC controlled. Two keyboards with an emergency stop and a desktop can be found integrated with the pneumatic power unit. AC electric is driven by a contactor and protected by a thermic breaker. All cables are colour coded. LED lights are located at top of the bollard.
Steel Structure:
The raising section of the bollards is 219 mm (options available) in diameter and raised height is 80 cm. The bollard is made of a special type of high-grade stainless steel that is galvanized and has a flashing light on top.
Environmental conditions and Power Requirements:
The bollard operates efficiently in all weather conditions between -15 degrees celsius to +65 degrees Celsius. It is also operable in 95% non-condensing humidity, 380V, 3 phase, and 50-60 Hz. which makes this bollard versatile.
Optional accessories
- Red/green traffic lights with steel pole
- Dual vehicle safety loop detector
- Safety photocell
- Stand and casing for safety photocell
- Stand and casing for safety photocell
- Uninterrupted power supply (UPS)
- Submersible drainage pump
- Wrong way alarm
- High-speed alarm
- SCADA or any control system
- Optima Cloud
- Radio receiver and antenna
- Radio transmitter
What models are available with Optima PRB Bollards?
- Raised Height: 400-1000 mm
- Diameter:168/219/273/324/355 mm
- Groups: from 1 bollard to 6 bollards per hydraulic power unit
CONTACT
Interested in Optima’s RAB-800 Bollards?
Contact Stebilex for services – supply, installation and maintenance of Optima’s RAB-800 Bollards
