Create scenes for your roller blinds and give and voice command or gesture to trigger the scene
Control any AC-powered installation with either a dedicated switch or a voice/gesture command
Ensure optimum use of power by monitoring the load with the power metering feature of the Roller Blinder
Prepared for
the Future
A roller shutter is a device that controls the roller blinds, awnings, gates, and Venetian blinds either remotely through the Z-wave or with a switch connected to it. Z-wave is a wireless communication protocol commonly used in home automation. It can also control other single-phase, AC-powered installations. When working with the Fibaro Home Center, it has the feature of power metering of the connected devices.
The compact device can be installed in the wall switch boxes and ensures the positioning of the roller blinds and Venetian blinds with great precision. The roller blinder works with any type of switch-toggle, momentary, etc- and any AC-powered device can be controlled with it.
Like any other Fibaro device, roller blinds make your life easy. You can configure scenes to control the roller blinds, or remote-control using a voice command, gesture, or a button click and an app. You can also control the blinds and gates with a dedicated switch. You can adopt any of the methods according to your wish.
The radio module is placed in the housing of the wall switch and this switch acts as the input for the roller blinder that controls the motor. The switch sends a control signal to the roller blinder and this signal triggers scenes or controls the AC motor of blinds, gates, etc.
It is recommended to use a wall box with 65 mm depth and those with 45 mm depth can be used if the space behind the switch is smaller.
Get the most compact AC-powered devices controlling Roller Shutter 3 from Fibaro
- Works with Z-Wave and Z-Wave+ controllers
- Supports security modes S0 and S2
- Equipped with advanced microprocessor control
- Roller blind motors with electronic or mechanical limit switches
- Power and energy metering feature
- Works with momentary, toggle, dedicated roller blind switches, and other switches
- Can be installed in-wall switch boxes
Interested in making your home smart?
Contact Stebilex today to schedule a consultation with a home automation expert.
Technical Specification
| Power Source | 100-240V~50/60Hz |
| Rated load current | 4.2A for lamps and resistive loads 1.7A for motors with compensated power factor (inductive loads) |
| Supported motor type | single-phase AC motors |
| Required limit switches | electronic and mechanic |
| Power consumption | up to 0.8W |
| Operating temperature | 0°C – 35°C |
| Active element | micro-gap relay switch µ |
| For installation in boxes | Ø >= 50mm, depth >= 60mm |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868.4 or 869.8 MHz EU 908.4, 908.42 or 916.0 MHz US 921.4 or 919.8 MHz ANZ 869.0 MHz RU |
| Range | up to 40m (131 ft) (depending on building structure) |
| Outside dimmensions (L x W x H) | 42.5mm x 38.25mm x 20.3mm |
| Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU |
