Mount the thermostatic head on three types of thermostatic radiator valves
Create schedules with the help of the Fibaro app to manage the temperature throughout a week
Smart Home Technology,
Simplified
Imagine you are taking a bath on a cold morning and want your bath towel to be heated and so are the bathroom and the water. All these can be done simultaneously using a smart heat controller from Fibaro. The most efficient heat controller in the world that shuts itself off when the heating is no longer required in a room.
The thermostatic head of the controller can be mounted on three different types of radiator valves-M30 x 1.5, Danfoss RTD-Nand Danfoss RA-N. These thermostatic heads measure the temperature of the room and adjust the heating as per the set value. The programmed settings of the temperature can be changed manually for a given period and after that, it returns to the programmed settings.
An LED ring around the device changes color to indicate the current temperature whenever the temperature rises beyond a set value. Noticing this color, you can adjust the room temperature using an unconstrained knob on the device. A free Fibaro app can be used to set the temperature range between 10 and 30 degrees Celsius and if manually set, the temperature range is between 16 and 24 degrees Celsius.
The device is equipped with an external temperature sensor which is sold separately. This measures the current temperature and lets the heat controller adjust the heating intensity as required by the situation. If the temperature sensor is not used, the device can only be mounted horizontally to ensure precision and safety. With the Fibaro heat controller, you can adjust the temperature of your house from anywhere in the world, taking home automation to a level up.
Instead of a single temperature controlling device, Fibaro employs thermostatic heads, cooperating with each other, to decentralize the heating of the house. They can be mounted on any number of radiator valves.
Get the most efficient and the smartest Heat Controller from Fibaro
- Compatible with both the Z-wave and Z-wave+ controllers
- Can be mounted on three types of radiator valves
- Supports Z-wave network security modes S0 and S2
- Battery-powered and the battery can be recharged using a micro-USB port
- Easy to install and remove
- An external temperature sensor can be used to ensure great precision
- Schedules can be set for a period
- Automatic calibration and anti-freezing features
Every project starts with a conversation
Contact Stebilex today to find out how we can help turn your home into a smart home.
Technical Specification
| Power Supply | 3.7V Li-Poly battery pack (non-replaceable) |
| Charging port | micro-USB |
| Charger voltage (not included) | 5V DC (±5%) |
| Minimum charger current (not included) | 0.5A |
| Operating temperature | 0 – 40°C |
| Storage temperature (standby mode) | -10 – 25°C |
| Maximum water temperature | 90°C |
| Temperature measuring accuracy | 0.5°C (within 0–40°C range) |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868 MHz ISM band (for EU) |
| Compliance with | RoHS 2011/65/EU RED 2014/53/EU |
| Range | up to 40m (131 ft) (depending on building structure) |
| Dimensions (Diameter x Height) | 56 x 74 mm (without the adapter) 56 x 87 mm (with the adapter) |
