Remote control the switch through Z-wave network or locally control using a wall switch
Conserve energy and lower your utility bills with the power and energy metering feature of the switch
Connect any type of regular wall switch to the smart switch and let them control your smart home
Smart Home
Simplified
A busy day you just forgot to switch off your bed lamp and kitchen exhaust and you are already in the office. Imagine the case where a single click on your smartphone turns the two installations at your home off. This possibility is actualized by the Double Switch 2 from Fibaro, a smart microswitch that can turn two devices connected to it off and on at a time.
Like most other Fibaro smart home devices, the Double Switch 2 also has the power and energy metering capability. It measures the load’s active power and energy consumption and allows the user to optimize energy usage. Z-wave, a popular wireless communication protocol, acts as the basis for the functioning of the device.
The very compact size of the switch makes it the smallest of its kind in the world and allows it to be installed in the housing of existing wall switch boxes. The installation process is very simple and the increased cross-section of the socket allows you to connect it with wires of larger diameter.
The in-built RGB diode light allows one to know whether the switch is added or removed from the network, the calibration or update is successful or not. The failure of devices, voltage drop, overheating, or overcharging will immediately be notified. If there are currently inactive devices, you will be notified about it too so that you can immediately turn them off remotely.
Get the smartest micro switch Double Switch 2 from Fibaro
Interested in making your home smart?
Contact Stebilex today to schedule a consultation with a home automation expert.
Technical Specification
| Power Source | 100-240V~50/60Hz |
| Rated load current (resistive loads only): |
8A for 240V~ 6.5A for 120V~ |
| Operating temperature | 0°C – 35°C |
| For installation in boxes | Ø >= 50mm, depth >= 60mm |
| Radio protocol | Z-Wave (500 series chip) |
| Radio frequency | 868.4 or 869.8 MHz EU 908.4, 908.42 or 916.0 MHz US 921.4 or 919.8 MHz ANZ 869.0 MHz RU |
| Range | up to 40m (131 ft) (depending on building structure) |
| Outside dimmensions (L x W x H) | 42.5mm x 38.25mm x 20.3mm |
| Radio Compliance with EU directives | RoHS 2011/65/EU RED 2014/53/EU |
