Hydraulic power unit and control electronics to
cover for power outages
Steel Structure that is hot-dip galvanized and AISI 316 grade stainless steel
Suitable for all weather conditions between
-15 degrees celsius to +65 degrees Celsius
Optional Accessories for added benefits and
What are Hydraulic Bollards HRB-HS-CT by Optima?
The hydraulic crash-tested retractable bollards from the Optima HRB-HS-CT series are intended for use at high-security vehicle entrances, as well as in military, commercial, industrial, governmental, and industrial facilities that are restricted to vehicular traffic during specific hours of the day.
The hydraulic drive unit may be operated manually using hand pumps to lower or raise the hydraulic bollard in the event of a power outage. Every type of card reader, biometric reader (such as fingerprint or hand shape), radio control, on/off key switch, etc. may all perform the raise/lower function with the aid of PLC-controlled electronics.
Additionally, the system can incorporate safety add-ons such as photocells, inductive loop detectors, flashing lights, or red/green lights.
- Hydraulic Power Unit and Control Electronics
In case of power failure, the bollard can be raised and lowered with the help of a manual pump. Bollard raise/lower time is 3-5 seconds. The emergency fast rise is 1.5 seconds.
- Steel Structure
The raising section of the bollards is 350 mm in diameter and raised height is 1100mm. The bollard is made of a special type of steel that is galvanized and is high-grade stainless steel with a flashing light on top.
- Environmental conditions and Power Requirements
The bollard operates efficiently in all weather conditions between -15 degrees celsius to +65 degrees Celsius. It is also operable in non-condensing humidity which makes this bollard versatile.
What accessories are included with the hydraulic bollard HRB-HS-CT by Optima?
- Red/green traffic lights with steel pole
- Dual vehicle safety loop detector
- LED flashing light on top of the bollard
What optional accessories are included with the hydraulic bollard HRB-HS-CT by optima?
- Safety photocell
- Stand and casing for safety photocell
- Protective construction around drive unit
- Hydraulic accumulator
- Transformer to convert the power
- Uninterrupted power supply
- DC motor and pump with batteries
- Submersible drainage pump
- Wrong way alarm
- High-speed alarm
- SCADA or any control system
Interested in Optima’s
HRB-HS-CT series hydraulic bollards?
Contact Stebilex for services – supply, installation and maintenance of HRB-HS-CT series hydraulic bollards by Optima